Wednesday, 19 December 2012

How To Make Money Over Internet


Ever seen little white fuzzy stuff on your concrete basement floor? Lots of homeowners find out they have an uninvited guest shacking up in their basement.

And your basement floor gets a lot of moisture from the ground underneath it, concrete is a porous substance. Mold on concrete can take many forms.

Or it may not have been properly installed, in some cases the moisture barrier is old or damaged, but. Concrete foundations have a moisture barrier, usually.

You're likely to get that nasty mold growing on your concrete floors, but if you have a heavy rain or a spell of humid weather, you usually don't need it. You may not have a moisture barrier built into your home, arizona and high altitudes, in arid places like Southern California.

You have to remove it from your concrete, no matter what your mold problem. The cause may be the concrete underneath, if you have mold growing on basement tiles or under basement carpeting.

A Little Bleach And Elbow Grease

You can also find cleaning products designed specifically for mold removal. 4 parts water to 1 part bleach is usually the recommended formula. Use a solution of water and bleach, for little bits of mold here on there. It's easy enough to clean up, if you've got a little mold growing on your concrete surfaces.

Make sure you have some good rubber gloves and be careful that the bleach doesn't come into contact with anything else. Be careful - that bleach is dangerous stuff. Scrub at the moldy spots with your bleach and water until it's gone.

Seal It Up

There may be cracks in the concrete or walls that allow moisture to come into the house. The appearance of mold on your concrete surfaces is a symptom of a bigger structural problem in your home, chances are. You might try sealing the cracks, if you have more serious mold problems and a good scrubbing won't get rid of it.

The compound will come with detailed instructions on how to use it. What you want is something especially designed to seal up cracks in your concrete and walls. Talk to the clerk and explain your problem, if you're totally unsure. Go to the hardware store and look for a waterproofing compound made for this specific purpose.

Call The Contractor

You may need to call a professional. You've got a much bigger problem, if you have water wicking up from under your foundation into the concrete.

Make sure you have some ventilation going, even if you're working in the basement. And make sure that the mold doesn't get into any other parts of the house, make sure you have good gloves and a mask, any time you're dealing with mold. But you should make sure to keep yourself safe, this is something you can probably do yourself. What you'll need to do is take off all the flooring so the original concrete is exposed.

Make sure that the new cement is mixed with a waterproofing compound that will keep down its moisture level. It has to be at least one inch thick. You'll need to have a new top layer of concrete poured, now.

Check your local yellow pages. This is a big job and most of us would have to call a contractor.

No comments:

Post a Comment